CML stainless steel tube fittings in SS304, SS316L and Duplex 2205

How to read a CML ordering number

A CML ordering number such as 3S6-MC-FT04-NM04 has four parts. This guide explains the prefix, series code, tube-size code and thread code, with worked examples.

Every dimension table on a CML series page, such as male connectors, lists a basic ordering number, for example MC-FT04-NM04. To order a specific fitting, add a prefix for pressure class and material in front of it. The complete number for a 3000 psi, 316L stainless steel male connector for 1/4 in. tube with a 1/4 in. NPT male thread is 3S6-MC-FT04-NM04.

Short answer: prefix (pressure and material) + series code + tube-size code + end code. 3S6 = 3000 psi SS316L, MC = male connector, FT04 = 1/4 in. tube, NM04 = 1/4 in. NPT male.

The four parts

PartExampleWhat it tells you
Prefix3S6Pressure class and material
Product seriesMCFitting type, here a male connector
Tube-size codeFT04Tube system and tube O.D., here 1/4 in. tube
Thread or endNM04End connection, here a 1/4 in. NPT male thread

The parts are joined with hyphens. The basic ordering number in the dimension tables starts at the series code, so you only add the prefix.

Prefix: pressure class and material

  • 3 is the 3000 psi pressure prefix and 6 is the 6000 psi pressure prefix.
  • The material code follows the pressure prefix:
CodeMaterial
S4SS304
S6SS316L
DPDuplex 2205
  • For S4 and DP, confirm the full number, including the pressure class, with our sales team when you order.
  • Assembly-dependent items and FGA flange adapters use S6 without a pressure prefix.

Pressure availability depends on tube O.D. (also on the technical page):

  • Fractional through 3/4 in. and metric through 20 mm: 3000 and 6000 psi.
  • Over 3/4 through 1 in. and over 20 through 25 mm: 3000 psi only. For multiple tube ends, the largest tube O.D. governs.
  • Above 1 in. or 25 mm requires engineering approval.

So 6S6-MC-FT04-NM04 is the 6000 psi version of the same male connector. A 1 in. fitting is available as 3000 psi only.

Product series code

The series code identifies the fitting type. There are 46 series. Five common ones:

CodeSeries
MCMale Connectors
FCFemale Connectors
UNTube Unions
UEUnion Elbows
UTUnion Tees

The full list is in product series codes.

Tube-size code: FT and MT

The tube-size code starts with the tube system:

  • FT is fractional tube. In the dimension tables, the number after FT is the tube O.D. in sixteenths of an inch.
  • MT is metric tube. The number after MT is the tube O.D. in millimetres.
CodeTube O.D.CodeTube O.D.
FT021/8 in.MT033 mm
FT041/4 in.MT066 mm
FT063/8 in.MT1010 mm
FT081/2 in.MT1212 mm
FT123/4 in.MT2020 mm
FT161 in.MT2525 mm

Fittings that join two tube sizes, such as reducing unions, carry two tube-size codes.

Thread or end code: NPT, BSPT, BSPP and metric

The last part describes the end that is not a tube end. Male connectors (MC) come with four thread types:

CodeThreadExampleMeaning
NMNPT maleMC-FT04-NM041/4 in. tube to 1/4 in. NPT male
BMBSPT (R) maleMC-FT04-BM041/4 in. tube to 1/4 in. BSPT male
GMBSPP (G) maleMC-FT04-GM041/4 in. tube to 1/4 in. BSPP male
MTMetric threadMC-FT02-MT141/8 in. tube to M14 x 1.5

For NPT, BSPT and BSPP, the number is the thread size in sixteenths of an inch: 02 is 1/8, 04 is 1/4, 08 is 1/2, 12 is 3/4 and 16 is 1. For metric threads, the number is the thread diameter in millimetres. The pitch is listed in the thread size column of the dimension table, for example M14 x 1.5. Not sure which thread a port has? Use the thread identification guide before you pick the code.

Female threads follow the same pattern with F in place of M: NF is NPT female, BF is BSPT (R) female and GF is BSPP (G) female, as used on female connectors.

Note that MT appears in two positions. As the tube-size code it means metric tube. As the end code it means metric thread. MC-MT06-NM04 is a 6 mm tube to 1/4 in. NPT male connector.

Worked examples

  • 3S6-MC-FT04-NM04: 3000 psi, 316L, male connector, 1/4 in. tube to 1/4 in. NPT male.
  • 6S6-MC-FT04-NM04: the same fitting at 6000 psi.
  • 3S6-MC-MT12-BM08: 3000 psi, 316L, male connector, 12 mm tube to 1/2 in. BSPT (R) male.
  • 3S6-FC-MT10-GF04: 3000 psi, 316L, female connector, 10 mm tube to 1/4 in. BSPP (G) female.
  • 3S4-MC-FT04-NM04 and 3DP-MC-FT04-NM04: the first example in SS304 and Duplex 2205. Confirm these numbers with us before ordering.

Before you send an inquiry

  1. Find the basic ordering number in the dimension table on the series page, or search for it in the Fitting Finder.
  2. Add the prefix for pressure class and material. Check the pressure availability for your tube O.D.
  3. Use S4 for SS304 or DP for Duplex 2205 in place of S6, and ask us to confirm the full number. Material differences are on Materials.
  4. Add the quantity for each item and send a quote request. You can also attach a drawing. Common ordering questions are in the FAQ, and how to install tube fittings covers what to do when the parts arrive.

Have a list of part numbers? Send it as it is

Paste the ordering numbers, or describe the fitting if you only have an old label or a drawing. We check every number and reply with prices and lead time.

Series for this topic: Male Connectors, Female Connectors, Tube Unions, Union Tees.

Related articles

Need a quote or a part that is not listed?

Send your ordering numbers, sizes, quantities or a drawing. Our sales team replies by email.