Quality
Every CML fitting passes six inspection steps, from incoming bar stock to the marked carton. Raw material is sourced from major stainless steel mills and verified on receipt.
- 6inspection steps, from incoming material to the packed carton
- PMIgrade verification by spectrometer on material batches
- Batchsampled hydrostatic or pneumatic pressure testing
- MTCmaterial test certificates available on request
How we check quality
Six checks, in production order.
- 01
Incoming inspection
Material certificates and chemical composition checked on receipt. PMI by spectrometer to verify the grade on batches.
- 02
In-process inspection
First-article inspection, then process sampling of dimensions. NPT and BSP threads checked with go/no-go gauges.
- 03
Appearance and surface
Burrs, scratches and surface finish visually inspected before assembly.
- 04
Pressure and leak testing
Hydrostatic or pneumatic tests on batch samples on our pressure test bench. Helium leak testing through a third-party laboratory on request.
- 05
Final inspection
Sampling inspection to AQL before packing.
- 06
Identification and packing
Outer cartons are marked with material, size and batch.
Documentation
Material test certificates
Material test certificates (MTC) available on request. Ask us about material documentation with your inquiry and state the grade and quantity.
Packing and marking
Outer cartons are marked with material, size and batch, so each carton can be matched to your order lines.
Label layout, for illustration.
CE certificate
Certificate details
- Issued by
- Ente Certificazione Macchine Srl (ECM), Italy
- Certificate type
- Certificate of Compliance (ECM voluntary mark)
- Product
- Fittings (tube fittings, pipe fittings)
- Standard
- EN 1092-1:2018
- Related CE directive
- 2014/68/EU (Pressure Equipment)
- Sizes listed
- 1/2", 1/4", 3/8", 3/4", 1", 1-1/4", 1-1/2", 2"
- Valid until
- 14 July 2027
The certificate was issued on a voluntary basis at the request of the manufacturer. Its scope is the products and sizes listed on it.
Our inspection equipment
What we use for the checks above.
Spectrometer
Grade verification (PMI) on incoming material.
CMM or vision measuring machine
Dimensional checks for first-article and process inspection.
Thread go/no-go gauges
Plug and ring gauges for NPT and BSP threads.
Hardness tester
Hardness checks on material and parts.
Pressure test bench
Hydrostatic and pneumatic testing of batch samples.
Helium leak testing
Through a third-party laboratory, on request.
Need documentation with your order?
Ask for MTC and certificate copies with your quotation request.
Try: